Menu
by 
(No Ratings Yet)
Loading...At present, Foton truck has formed a well-structured technological innovation system. The technological innovation system is composed of six levels, including the company’s Automotive Engineering Research Institute, overseas R&D centers in Japan, Taiwan, and Europe, domestic and foreign colleges and universities, research institutes, foreign professional automobile R&D institutions, secondary factory research institutes, and supply chain synchronous R&D institutions, not only ensures that the final product has independent intellectual property rights, shortens the development cycle, but also ensures the international synchronization and consistency of product technology level.
With the construction of five key projects, including Foton Auman GTL energy-saving heavy truck technology transformation, the company will accelerate globalization and strive to have a place in the world’s commercial vehicle enterprise structure.
Take the Foton GTL 8*4 Transit Mixer as an example:
The transport mixer body is very suitable for people in the construction industry because it has a variety of capacities, such as 10 cubic meters, etc. Therefore, the working time for transporting concrete is short. In addition to the mixer body, the truck can be equipped with other rear body configurations such as a transport mixer.
The Auman GTL 8×4 mixer truck uses the bodywork of the Ressa heavy machine, also owned by Foton Daimler. The maximum stirring volume of the tank is 7.2 cubic meters. Of course, this is only the maximum loading capacity, and we also have to consider the impact of going up and down the liquid level when transporting.
The water tank is an essential part of a mixer, and we need to wash the tank thoroughly after transporting the concrete. In order to meet this point, the Auman GTL 8 × 4 mixer is equipped with an oversized water tank in front of the tank. There is enough water to clean the tank, and it also has a level gauge, so we can know the water surplus at any time.
| Driving form： | 8X4 |
| Body dimensions： | 10.12×2.53×3.995m |
| Front suspension/rear suspension： | 1.45/2.47m |
| Wheelbase： | 2100+2750+1350mm |
| Rated load： | 15.97tons |
| Vehicle weight： | 14.9tons |
| Maximum speed： | 80km/h |
| Front track width/rear track width： | Front：2020/2020mm；Rear：1830/1830mm |
The truck is powered by an 11.8-liter turbocharged diesel engine that produces 400 horsepower and 100 Nm of torque. It shifts through a 12-speed manual transmission with a high-and low-speed switch separator. The truck adopts longitudinal leaf spring suspension, a double-acting telescopic shock absorber with a stabilizer at the front, and an inverted longitudinal leaf spring balance shaft suspension with a stabilizer at the rear. Prevent large trucks from coming from dual-loop pneumatic braking systems.
The Auman Law Urban Construction Mixer Truck adopts a Cummins X12 engine, a 360horsepower engine with a direct gearbox and a large speed ratio rear axle, the maximum torque is 1900N·m, which significantly enhances the explosive power of the product; At the same time, the vehicle body height is increased by 150mm, the water tank ground clearance is ≥ 650mm, and the vehicle waterproof level reaches IP7, which can easily cope with complex road conditions.
| Engine model： | Foton CumminsX12NS6B360 |
| Fuel type： | diesel fuel |
| The Number of cylinders： | Six |
| Maximum output power： | 265kW |
| Maximum horsepower： | 360 horsepower |
| Displacement： | 11.8L |
| Emission standards： | National Six |
| Fuel injection system： | Common Rail (Country V.) |
| Rated speed： | 1900RPM |
The rear of the bodywork, the Auman GTL 8×4 mixer truck is equipped with a high-pressure water gun and an extended discharge hopper like most mixer trucks, and the configuration is decent. After all, as an engineering vehicle, practicality is its first priority, and it is also necessary to remind all card friends that the water pipe must be wound well after use, and beware of the phenomenon of mopping the floor with water pipes.
| Vehicle announcement： | BJ5319GJB-6B |
| Vehicle type： | Concrete mixer truck |
| Bodywork branding： | Foton Auman |
| The origin of the vehicle： | Beijing |
| The volume of agitation： | 7.2m³ |
| Other： | 350L aluminum fuel tank\ desert filter |
| Cab： | GTL mid-length body flat roof |
| Gearbox model： | 12JSD180 |
| The number of gears： | 12 |
| Chassis brand： | Foton Auman |
| Chassis model： | BJ5319GJBY6GRL-01 |
| Chassis system： | The Auman GTL |
| Description of rear bridge： | 13T |
| Speed ratio： | 4.38 |
| The number of spring pieces： | 13/14/12 |
| The number of tires： | 12 |
| Tire specifications： | 11.00R20 18PR,11.00R20 16PR |
On August 28, 2011, at Foton’s 15th-anniversary celebration, Foton Auman’s fourth-generation heavy-duty truck GTL will roll off the production line as Foton’s 5 millionth vehicle. So far, Foton Auman’s five series from 1 series to 9 strings have successfully formed three major systems of VT, TX, and GTL, and GTL is the most high-end product among the three
We adhere to the business policy of “quality first, service first, continuous improvement, innovation to meet customers”, and “high quality, high standard” as the quality goal.