Foton Pto Gear Assembly

• WASHER 40″: A large washer with a diameter of 40 inches used to provide stability and support.
• WASHER: A small flat metal disc used to distribute the load and prevent the PTO gear assembly from loosening.
• BEARING: A rotating element that supports the PTO driven gears, allowing them to rotate smoothly.
• OUTPUT SHAFT FRONT RETAINER RING: A circular metal ring that secures the output shaft at the front end of the PTO assembly.
• PTO DRIVEN SMALL GEAR: A small gear that is driven by the PTO transmission and meshes with other gears to transfer power.
• NEEDLE AND CARRIER UNIT: A component that includes needle bearings and a carrier to support and guide the PTO driven gears.
• PTO MESHING SEAT: A seat where the PTO driven gears are positioned and engaged with the driving gears.
• PTO SHIFT COLLAR: A collar that is used to shift and engage the PTO gears into the desired gear position.
• PTO DRIVEN BIG GEAR: A larger gear that is driven by the PTO transmission and meshes with other gears to transfer power.
• REAR RETAINER RING: A circular metal ring that secures the output shaft at the rear end of the PTO assembly.
• OUTPUT SHAFT HALF RETAINER RING: A circular metal ring that secures the output shaft at the middle of the PTO assembly.
• OUTPUT SHAFT BEARING WASHER: A washer placed around the output shaft to provide support and reduce friction.
• O RING: A rubber ring used as a seal to prevent leakage of fluids.
• OIL SEAL RETAINER RING: A circular metal ring that holds the oil seal in place to prevent leaks.
• REAR END COVER I: A cover that seals the rear end of the PTO assembly, protecting the internal components.
• BOLT: A fastener used to secure and join different components together.
• SAFETY BONNET: A protective cover that prevents accidental contact with moving parts.
• PTO HIGH GEAR DRIVING GEAR: A gear that drives the PTO driven gears at high speed for increased power output.
• SPACER BUSH: A cylindrical component that fills the gap between two adjacent components to ensure proper alignment.
• PTO LOW GEAR DRIVING GEAR: A gear that drives the PTO driven gears at low speed for increased torque output.
• THRUST RING: A ring that helps distribute axial loads and prevent excessive wear on the components.
• ROUND NUT: A circular nut used to secure and tighten components.
• WASHER LOCK: A washer with teeth that securely locks a nut in place, preventing it from loosening.

These components work together to transmit power from the PTO transmission to various devices or implements connected to the PTO system. The Foton Pto Gear Assembly ensures smooth and reliable power transfer, making it an essential part of the machinery it is installed in.